Mini CD Keychain Template Maker

The default here (maker-corrected fit) is a front cover of two 40×40 mm panels (80×40 mm unfolded), a back of two 49×37 mm panels, a 4.5 mm spine in three strips, a 38 mm disc and a 6 mm center hole. The package guide says a 47 mm wide back, 5 mm spine and 39 mm disc, but a maker who tested it found the back comes out short and the disc tight that way, so this tool uses their corrected 49 mm, 38 mm and 4.5 mm spine. It is an unofficial template, not affiliated with Daiso.

Set the print scale to "Actual size" or 100%, not "Fit to page". Every PDF page has a 2-inch ruler at the bottom, so you can check with a ruler before cutting. Printing from a computer is usually more accurate than from a phone.

Yes. The "4×6 photo PNG" is a 152×102 mm (landscape 4×6 inch) image at 300 dpi, so a pharmacy or supermarket kiosk prints it at true size with plenty of resolution. Turn off any fit-to-page, auto-enlarge or borderless setting on the kiosk, and check that the front cover measures 40 mm on the first print.

The disc center is drawn as a 6 mm circle. A standard 1/4-inch single-hole punch is about 6.35 mm and works well. Punch the hole first, glue the disc into the case, then trim the outer edge. A white ring is drawn around the hole so the cut looks clean.

Fold the front cover in half along the center dash and slip it inside the lid. Fold the back strip along the dashes between the panels and fit it into the lower slot, so the spine strips show along the case edge. Small dashed ticks outside each piece mark every fold line.

Yes. Keychains vary by about 1 mm, so use the − and + buttons under "Size" to match the front, back, spine and disc in 0.5 mm steps. The defaults are for the Daiso one, so measure any other case with a ruler and adjust.

It is free and needs no sign-up. Your photo and text are drawn entirely in this browser and are never uploaded to a server. Reloading the page clears the photo you added.

Yes. Stick an NFC tag on the back of the disc or inside the case and write your Spotify or YouTube Music playlist link to it, then tap a phone to play. The template does not print the tag, so add it after gluing the insert in.